Hi All,

I am trying to create a POST API in the Industrial Edge which receives the generic response from an external application. 

I did use proper authentication while testing and did get the authentication token.

When I am testing it through the Postman, I am getting either 404 or 503 response code.

However, when I run the same flow using pure Node red, I am getting the desired behaviour.

Could you give me a heads up in building a generic simple API in Industrial Edge Flow Creator that can be tested by Postman.

Curl for the same is attached

curl -X POST http://<node-red-host>:1880/api/temperature \  -H "Content-Type: application/json" \  -d '{"temperature": 27.3}'

[
    {
        "id": "7cfeff5f7ee7b433",
        "type": "http in",
        "z": "f48a6a085b6b67fd",
        "name": "Temperature Post",
        "url": "/api/temperature",
        "method": "post",
        "upload": false,
        "skipBodyParsing": false,
        "swaggerDoc": "",
        "x": 240,
        "y": 140,
        "wires": [
            [
                "dbf96b69a0c04da4"
            ]
        ]
    }
]

Hi Pramod,

The implementation of anything using nodes in Flow Creator is not supported by Siemens. The reason is that these nodes are not developed by Siemens but by 3rd party open source community. Please, have a look at Node-RED web site where you can check the nodes documentation and also ask in forum: https://discourse.nodered.org/t/sending-post-http-request-in-json-for-rest-api/43830