Navigation
Rating 
Thanks 1
3 Entries
| 8/1/2009 9:51 AM | |
|
Posts: 2 Rating:
|
im new at the plc programming with step 5, so that i thing i need trainning course in this software, any one help me to get this cousre, thanx |
| 8/1/2009 7:44 PM | |
Joined: 3/21/2006 Last visit: 1/10/2026 Posts: 10247 Rating:
|
Hello, You must to contact with Siemens office in your place for more details about available training courses in Step5. But I suggest you to start with http://support.automation.siemens.com/WW/view/en/27229639. There you'll find a lot of manuals and instructions how to use and work with Step5 hardware and software. Hope this will helps. Best regards, Hristo Mihalev |
This contribution was helpful to
|
|
| 8/3/2009 10:05 AM | |
Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating:
|
Thread closed, because question is already discussed in the thread with the subject i need trainning course with step 5 . Best regards O_Moderator |
Follow us on