Hi all,

I mentioned in my previous reply to this thread:

When I retrieved the multiproject and compiled it without error.

When I copied and pasted a motor blockin the retrieved multiproject and got error when compiled it.

After tried several times, I found the successful compilation is just "change only" compilation. When I choose compiling the "Entire system", I got error no matter adding a block or not.

So seems to me the achieved multiproject has some error. But how to fix it? Because I need to do some modification on the existing multiproject.



Please help!

This is the log file.

***************************************************
Error Log File for CFC/SFC ...
02/07/10 - 14:08:40,0xEE0503E5,0xFF010205,0xFF010205
0xEE01028D0x9SRV_UDA_ID_AND_VALUE_GET =INPUT_ERRORElement not found.
0xEE01028D0x4GL_UDA_GET =INPUT_ERRORElement not found.
0xEE0503E50x11SRV_PCSLINK_NEXT =SYSTEM_ERRORProgramming error.
0xEE0503FF0xFSRV_PRIV_CONNECT_SINKS_GET =SYSTEM_ERRORError being passed on.
0xEE0503FF0xASRV_CONNECT_SINKS_GET =SYSTEM_ERRORError being passed on.
0xEE0503FF0xASRV_PASSED_ON_OUT_VARS_TRAVERS_IN_PREORDER =SYSTEM_ERRORError being passed on.
0xEE0503FF0x1SRV_SELECT_WITH_GLOB_VAR_OR_PROGRAM_CONNECTED_OUT_VARS =SYSTEM_ERRORError being passed on.
0xEE0503FF0x1TMS_PCLINK_NEXT_WITH_FILTER =SYSTEM_ERRORError being passed on.
0xEE0503FF0x17GEN_S7_WITH_GLOB_VAR_CONNECTED_OUT_VARS_GET =SYSTEM_ERRORError being passed on.
***************************************************
T41