Hi,
I am using WinCC Flex 2008 SP1 and the device is MP277 10" Touch.
I want to interface a bar code reader with this particular touch panel.

Specifications of the bar code reader is as follows:
Manufacurer: Keyence Global
Interface with the TP: USB port

I could detect the device on the USB port of the touch panel.
But when I open the command promt of the TP it shows for eg:"10111234.exe" cannot be executed when I hold the bar code reader in front of the bar code.

Now is it possible to interface this porduct with the TP?
If yes, then do I need to install new drivers on the TP to execute trhe commands or are there commands in Winncc flex to execute the commands thrown by the bar code reader?

Please guide me through this.

Regards.

Thanks for replying.
I found out a way when I used the bar code reader on the recipe view provided in WinCC Flex I could manage to get the codes in the Data Name row of the recipe!!
Let me try out some new things and see if I can up with something.
I will check out the links provided by you.

Regards.