SiePortal

The integrated platform for your product selection, buying and support workflow - bringing together Industry Mall and Online Support.

Products & Services
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Support Support
{{(apiData.Support | filter:{'rank':1}:true)[0].title}} Support
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
MySiePortal MySiePortal
{{(apiData.MySiePortal | filter:{'rank':1}:true)[0].title}} MySiePortal
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Cart ({{apiData.CartCount}})

Navigation

Want to increase Spindle RPM

6/5/2010 7:40 AM	Rate (0)
PISCEAN 2010 Posts: 8092 Rating: (884)	Hi, We have got lathe machine with 802D system + 611U axis drive with Spindle YaskawamakeACVFD drive. Axis power drives Control moduleis 6SN1118-0NH11-0AA0. Spindle command max voltage is + or - 10V DC.At present spindle speed is limited to max 56 RPM at 50 Hz. I can increase the frequency at can get 90 spindle RPM. The same thing I would like to achieve from program command i.e. M03 S90. But even then getting maximum spindle RPM as 56. Can any one guide me as what parameters needs to be adjusted so that 90 spindle RPM can be achieved by program. Thanks in advance. DEEP.
PISCEAN 2010 Posts: 8092 Rating: (884)
Suggestion To thank Quote Answer

6/5/2010 12:04 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (485)	Hello Deep.... Have you checked the parameter 32000Maximum_ Axis_ velocity in Spindle and the Gear Ratios. Could also check in the Setting data where spindle maximum and minimumSpeed is defined. (offset parameter softkey> Setting data) hope this will solve your problem..... Ekalavya
Ekalavya Posts: 2964 Rating: (485)
Suggestion To thank Quote Answer

6/7/2010 11:52 AM	Rate (0)
pfuser Gold Member Joined: 9/18/2006 Last visit: 12/8/2025 Posts: 596 Rating: (64)	Hi. Ratio output voltage / output speed (only applicable to analog spindle): MD 32260: RATED_VELO (rated motor speed) MD 32250: RATED_OUTVAL (rated output voltage). Best regards.

Suggestion To thank Quote Answer

6/11/2010 5:58 AM	Rate (0)
PISCEAN 2010 Posts: 8092 Rating: (884)	Hello Ekalavya & pfuser, Thank you very much for your reply. With regards, DEEP.
PISCEAN 2010 Posts: 8092 Rating: (884)
Suggestion To thank Quote Answer

6/11/2010 6:53 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (485)	Hello DEEP... Looks like your problem is solved.... GOOD !!!!!!!!...... Ekalavya
Ekalavya Posts: 2964 Rating: (485)
Suggestion To thank Quote Answer

Share this page:

Share this page on...