Navigation
Rating 
Thanks 0
2 Entries
| 12/29/2010 11:36 AM | |
|
Posts: 91 Rating:
|
Hello , we also facing around same problem. We using TRAORI function for swivel head. TRAORI type is 24. now when ourA axis is rotating after TRAORI activez axis is moving on positive direction 1. Axis origins X0 = front of table Y0 = right side of table (seen from front of table) Z0 = machine table surface A0 = spindle pointing downwards (6 o’clock position) C0 = spindle nameplate pointing towards front of machine (A axis gearbox pointing to back of machine)2. Axis directions X = positive is towards back of table Y = positive is towards left Z = positive is upwards A = clockwise (view from front of the machine backwards) C = counterclockwise (view from top of machine downwards) Attachmenttrafo parameters.pdf (232 Downloads) |
Last edited by: CS Moderator at: 12/30/2010 10:16 AMnew subject after splitting |
|
| 12/30/2010 10:18 AM | |
Joined: 9/1/2005 Last visit: 10/31/2025 Posts: 4114 Rating:
|
closed cause question posted twice. The second thread with the subject TRAORI Help - TRAORI type is 24is published withinthe same conference . Best regards CS Moderator |
|
My Forum is the place to personalize your profile, |
|
Follow us on