Navigation
Rating 
Thanks 0
4 Entries
| 3/19/2011 11:23 AM | |
|
Posts: 91 Rating:
|
Hello Chennai CNC, You can find the Torque value at Drive md , parameter R31. or if you have stater software then check in Expert list. |
| 3/19/2011 12:43 PM | |
|
Posts: 2964 Rating:
|
Hello,,, @ Chennai CNC is talking about 840D powerline. What you have talking about Solution line and starter.... There is a Difference..... Regards, Ekalavya |
| 3/19/2011 1:51 PM | |
|
Posts: 177 Rating:
|
Dear Ekalavya It is 840D Power Line. |
Follow us on