N10 DEF INT ERROR
N30 WRITE(ERROR,"TEST", R0 << " " << R1 << " " << R2)

This instructions will write R0 - space - R1 - space - R2 into the file TEST.MPF
You have to pack the WRITE instruction into a separate Program insidea loop to run all used R-Parameter numbers.
After You run this additional programYou can copy TEST.MPF to an USB-stick andYou can manipulate this file in EXCEL.

I assume You store the R-parameter parallel to an operation process by any SYNACT. Ofcourse You can insert the WRITE-instruction inthe original PartProgram as well. But the delay during the Writing destroyesthe continously movement (You want to read positions and the current speed).

You'll find more information regarding the WRITE-command in the programming manual.

hope that helps
CNC600

dimitrids

hello,

I'm currently logging variables (velocity x,y,z ) into R-parameters , this works but now i want to find a way to get these R-parameters out of the NC, in a txt or csv file and transport them to an external pc/usb.
Does someone knows how to do this?
All options are welcome

Thx

Dimitri De Schrijver

CNC600

N10 DEF INT ERROR
N30 WRITE(ERROR,"TEST", R0 << " " << R1 << " " << R2)

CNC600

I assume You store the R-parameter parallel to an operation process by any SYNACT. Ofcourse You can insert the WRITE-instruction inthe original PartProgram as well. But the delay during the Writing destroyesthe continously movement (You want to read positions and the current speed).