For a project with PCS7 V7.1 SP3 i want to use the AUX_PR5....10 inputs ofa meas_mon/Dig_mon block to add aditional information to my alarm message.

i connected an integer tothe AUX_PR5 input of a meas mon andadded thecode(CAT. @5%d@) to my alarm message, so the number written in AUX_PR5 is written into my alarm message in WinCC.

I tested this with WinCC and PLCsim and it worked without any problems, but when i try it with a CPU (417 in my case)it doesn't work anymore.
the number 0 is added to my alarm message, but not the number written into the AUX_PR5 input.

when i look at pocess_value 1 to 10 of my alarm in WinCC i can see that 1 to 4 witch are used for batch and measured value are updated, but proces_value 5 to 10 where the AUX_PR inputs are writtenremain empty.

I tried replacing the integer for a real, and with a different CPU but the problem remains.

Does anyone have expirience with this problem?

I started at AUX_PR06 instead of 5. so i left a gap and my values weren't transferred.

a bit strange that PLCsim didn't care about this.