Navigation
Connecting S71200 1214c to Sinamics G120 CU240S PN_F
Created by: s.temmerman at: 4/5/2012 11:57 AM (1 Replies)
Rating 
Thanks 1
2 Entries
| 4/5/2012 11:57 AM | |
|
Posts: 5 Rating:
|
Hi all, I'm a student and for my final project i need to transfer data from one G120 drive to an other with profinet. But when i connect to my drives with the S7-1200 i still get errors. I've put in the correct ip numbers and chose the same telegram in step 7 and starter but still i keep getting errors. In the attachment there is a pdf with the errors. I'm totaly new to profinet and step 7 V11. Can anyone help? Is ther anny step by step guide for this? Thx Sebastien Edit: I got rid of the errors i seems you need to connect te digital lines like you connected the profinet wires. But I still need to know what block to use for the comunication. And how i use it. Attachmentscreenshots.pdf (608 Downloads) |
Last edited by: s.temmerman at: 4/5/2012 3:20 PM |
|
| 4/7/2012 1:30 PM | |
|
Posts: 211 Rating:
|
Read this first: http://support.automation.siemens.com/WW/view/en/45287261 and then do like this at screenshot Aslo: /tf/WW/en/Posts/57543#top |
Last edited by: Homeroid_BL at: 4/7/2012 1:51 PMLast edited by: Homeroid_BL at: 4/7/2012 1:48 PM |
|
This contribution was helpful to
|
|
Follow us on