alexmac_uk

Hi all, I currently have a problem on a machine with an 840D controller. Alarm error codes are not being displayed when they should. They are 700000-700500 etc. the alu.uk file and alu.gr file are both loaded into the MBBDE alarm codes directory, but when any message appears its shown as 700033 0 0 0 0.

Even if the language is changed to German and back again to English it makes no difference.

Any ideas??

Hello.

Then you need to check the file MBDDE.INI.

The documentation.
The alarm and message texts that are to be used are set in the F: \ mmc2 \ mbdde.ini file. For this purpose, the appropriate paths to the application-specific standard and user files must be stored in the [Textfiles] section of file MBDDE.INI.
Excerpt of the "MBDDE.INI" file:
...
[Textfiles]

PLC = F: \ dh \ mb.dir \ plc_ (In your case F: \ dh \ mb.dir \ ALU_)

The user-specific text files that are now in the directory: <F: \ dh \ mb.dir are disclosed to the system via a corresponding entry in the MBDDE.INI file.

To prevent a modified MBDDE.INI file from being overwritten when the software is updated, it must be stored in the path designated for that purpose: USER Path (F: \ user \ mbdde.ini).

Rewrite the line F: \ dh \ mb.dir \ plc_ -> F: \ dh \ mb.dir \ ALU_

Check the path and find the files ALU_ UK.COM and ALU_GR.COM.

Best regards.

My error. In file MBDDE.INI

[TextFiles]

UserPLC=....................

Best regards.