Navigation
Rating 
Thanks 3
5 Entries
| 4/19/2012 8:27 AM | |
Joined: 8/18/2009 Last visit: 7/28/2025 Posts: 558 Rating:
|
Dear Expert, Please tell me what is difference betweenSTEP 7 (TIA Portal)&STEP 7 / STEP 7 Lite This makes confusion.... please reply with description...
|
|
Rajkiran Patil |
|
This contribution was helpful to
|
|
| 4/19/2012 8:42 AM | |
Joined: 1/28/2009 Last visit: 1/5/2026 Posts: 6892 Rating:
|
Hello RAJKIRAN, check the following articles: Siemens Revolutionizes Automation Engineering with TIA PortalSiemens Introduces TIA PortalBest regards, Hamid Hosseini |
Last edited by: hdhosseini at: 4/19/2012 8:48 AM |
|
| 4/19/2012 8:57 AM | |
|
Joined: 8/18/2009 Last visit: 7/28/2025 Posts: 558 Rating:
|
Means all question we can ask in SIMATIC WinCCif related to wincc SCADA..... & if more deeply technical questionrelated to wincc SCADA then we go toSIMATIC WinCC(TIA Portal) is this correct....
|
|
Rajkiran Patil |
|
| 11/7/2012 6:41 AM | |
|
Posts: 69 Rating:
|
look here https://support.automation.siemens.com/kompatool/pages/main/start.jsf ;) best reggards |
Last edited by: Tmsoft at: 11/7/2012 6:46 AM |
|
Follow us on