Navigation
how to bypass the interlock signals in PCS7 V7.0
Created by: doggalli at: 1/9/2013 7:13 AM (5 Replies)
Rating 
Thanks 0
6 Entries
| 1/9/2013 7:13 AM | |
|
Posts: 45 Rating:
|
Dear Friends, Please tell how to Bypass the interlock signals in PCS7 v7.0. Please help me. Thanks in Advance. Regards, Doggalli. |
| 1/9/2013 3:21 PM | |
Joined: 3/14/2008 Last visit: 12/28/2025 Posts: 2233 Rating:
|
Not possible from this version, only as of 8.0. Make something like this: OP_DIG3, output1 on inverted IN01, output 2 on IN02, output 3 on IN03. If you need more signals to bypass, then you have to make a own function (I think is easiest) in SCL. |
|
If I could help you, you can use the RATE button. Thank you. |
|
| 1/9/2013 3:51 PM | |
|
Posts: 45 Rating:
|
Dear Friends, Thank you very much. I ll try. |
| 1/11/2013 11:59 PM | |
|
Joined: 3/14/2008 Last visit: 12/28/2025 Posts: 2233 Rating:
|
oeps, little typo as of 7.1 indeed |
|
If I could help you, you can use the RATE button. Thank you. |
|
Follow us on