patrick.rommeluere

Hello,

I'm not sure I put the right values of ID and INDEX.
In the attached test program, let's say I want to read the SetPoint_B_Mantissa value.

I put DW#16#8064 as INDEX (the smaller logical adress of my module is 100decimal, and it is a mixed input/output module)

I didn't know what value to put as ID but I made a loop to test values from 0 to 255.

--------------------------------------------------------------
Hi Patrick,

Sorry for my previous comments, I was wrong, the DW#16#8064 was ok, because you try output module, therefore you are right to set bit 15,TRY recreate a new DB plug onto RECORD.

I wish may help.