SiePortal

The integrated platform for your product selection, buying and support workflow - bringing together Industry Mall and Online Support.

Products & Services
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Support Support
{{(apiData.Support | filter:{'rank':1}:true)[0].title}} Support
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
MySiePortal MySiePortal
{{(apiData.MySiePortal | filter:{'rank':1}:true)[0].title}} MySiePortal
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Cart ({{apiData.CartCount}})

Navigation

I/O G120 DEFINITION

6/5/2013 9:02 AM	Rate (0)
Umbi Experienced Member Joined: 4/8/2010 Last visit: 7/3/2025 Posts: 96 Rating: (0)	I am confused for G120C I/O definition : I must retrofit a old inverter and I mast use: DI0 as movement enable when low level (0), DI2 forward movement when high (1) and DI3 backward movement. when high (1) In parameter P756 I have put 0 (Analog input 0-10) But combination for I/O it's black for me Attachment I_O_G120definition.jpg (253 Downloads)

Suggestion To thank Quote Answer

6/6/2013 3:13 PM	Rate (0)
Umbi Experienced Member Joined: 4/8/2010 Last visit: 7/3/2025 Posts: 96 Rating: (0)	I have configured a drive with Macro 19 and it's work (I have Inverted enable) butON left o right it's impulsive. When Left o Righ go off drive don't stop, it's necessary switch OFF enable. There is a system to create or mofify macro ?

Suggestion To thank Quote Answer

6/13/2013 6:52 PM	Rate (0)
Carcamo Member Joined: 11/26/2012 Last visit: 8/19/2025 Posts: 2 Rating: (0)	you can modify the macros in the way you want...just assign a diferent function in the imputs view like in the picture you attached. the functions On/right and On/left can be assigned tothe imputs you need...

Suggestion To thank Quote Answer

6/13/2013 11:10 PM	Rate (0)
Alan S Posts: 21 Rating: (3)	Select Macro 4, in Setup. Then,through Parameters: p0840 = 723.0 p1001 = +velocity P1002 = -velocity p1016 = 2 p1020 = r722.2 (refered p1021 = r722.3
Alan S Posts: 21 Rating: (3)
Suggestion To thank Quote Answer

6/14/2013 4:48 PM	Rate (0)
Umbi Experienced Member Joined: 4/8/2010 Last visit: 7/3/2025 Posts: 96 Rating: (0)	I have no macro 4 from macro 3 jump to macro 8 at parameter 15 ... This with G120C_USS_MB version 4.5

Suggestion To thank Quote Answer

Share this page:

Share this page on...