I’m having problems to compile the OS. Everythingslike the connections, charts, etc… I can compile without errors, but only in the OS, return error. The log is telling that the ‘setting are invalid’.
\WinCC Application\OS
-> Error occurred compiling the object
A question:
1 - In my ‘Station Configuration Editor’ I have only the index 1 configured to WinccAplication
2 – In my screen into the PLC – configure is inactive telling that I must install a new version from simatic net.

obs: I'm using the Virtual Machine withthe PCS7 V6.0 and PLCSIM

Could somebody please help me?

Regards

Pasinato

I’m having problems to compile the OS. Everythingslike the connections, charts, etc… I can compile without errors, but only in the OS, return error. The log is telling that the ‘setting are invalid’.
\WinCC Application\OS
-> Error occurred compiling the object
A question:
1 - In my ‘Station Configuration Editor’ I have only the index 1 configured to WinccAplication
2 – In my screen into the PLC – configure is inactive telling that I must install a new version from simatic net.

obs: I'm using the Virtual Machine withthe PCS7 V6.0 and PLCSIM

Could somebody please help me?

Regards

thank you Maraitorzz for the tip!

I already have configured a CP 5611 in MPI and I alsoalready had tested the IE general. But in IE general I have to change to ethernet.

But, without successfull, yet!


regards