Navigation
Rating 
Thanks 0
4 Entries
| 2/25/2014 7:57 PM | |
Joined: 5/4/2009 Last visit: 1/1/2026 Posts: 916 Rating:
|
Dear friends, Is it possible to operate "LabView" with TIA V12 PLCSim? If yes, HOW? Tomy |
|
Aim Higher |
|
| 2/26/2014 6:05 AM | |
Joined: 1/28/2009 Last visit: 1/5/2026 Posts: 6892 Rating:
|
Hello, I think it is possible by OPC.You can try the old trick discussed here. Good Luck Hamid Hosseini |
| 2/26/2014 9:42 AM | |
|
Joined: 5/4/2009 Last visit: 1/1/2026 Posts: 916 Rating:
|
Unfortunately the link is in GERMAN Tomy |
|
Aim Higher |
|
| 2/26/2014 10:06 AM | |
|
Joined: 1/28/2009 Last visit: 1/5/2026 Posts: 6892 Rating:
|
Hello again, The original discussion was in German,Here is a translation.Please note that it is about PLCSIM for S7-300/400.You can use the idea and check if it is applicable for PLCSIM V12. Best regards, Hamid Hosseini |
Follow us on