William B.

Helpful?

No.

I mean when i have a programm with a lot of blocks, i want to make several pages of the programm.

I have fount how to do this, there is a little icon on the top of the screen.

Its called "Page Layout"

In the previos LOGOSoft it was a part of File => Proporties => Page Layout,

now there is an Icon.

PRACTICLE EXAMPLE: LINK ANALOG INPUT TO TIMER TARGET

In the LOGO V8, the linking of internal parameters are shown graphically.
Such an example is described in the attached image.

w

USING THE COLOURS

There are now many colour selections you can make for your editor. One useful place to use it is to have the special flags (such as M8) to be in a different colour.

w

Toeternietoe

William B.

Helpful?

No.

I mean when i have a programm with a lot of blocks, i want to make several pages of the programm.

I have fount how to do this, there is a little icon on the top of the screen.

Its called "Page Layout"

In the previos LOGOSoft it was a part of File => Proporties => Page Layout,

now there is an Icon.

WORKING WITH MULTIPLE PAGES IN A PROJECT

The attached picture shows what Toeternietoe is speaking of (thank you).

Also shown in the image is how to increase / decrease the work space per page.

w

HOW TO SELECT THE LOGO VERSION TO BE USED IN THE PROJECT

Currently there are x3LOGO versions available in the market (V6 / V7 / V8). Because of the differences in memory and available instructions, it is important to select the hardware before constructing a circuit. There are 3 ways to make this selection.. as shown in the image.

Good news: If you edit a V6 or V7 LOGO's program in LogoSoft V8, you can still open the program in LogoSoft V7.1.

w

New question published bymarkheuer is split to a separate thread with the subject LogoSoft V8, if EDIT input/output names, the s/w locks up.

Best regards
Min_Moderator

markheuer

Say, not sure this goes here, but after inserting a block, the cursor defaults to the wiring tool (using LAD). Is there a way to change it so it will default to the selection tool? Kinda frustrating when adding more than 1 contact at a time...