Hi there.

Where can I find the specification
that states the maximum possible nesting depth
that the OBA8 can handle?

I am also looking for a formal description (Siemens documentation)
of what the layout memory is for.

Thank you.
w

William  try to search in logo help  for < memory space >

it think you will find more Info .

 in any case take alook in the attachment

this is what i found but it is not clear to me if it is only for OBA8 or in General .

LOGO! restricts the nesting depth for your circuit program. Your circuit program

has a maximum nesting depth of 58 objects.

This determines the following:

1 input + 56 blocks +1 output

Max. depth of a circuit program = 58 objects

cdrshort

LOGO! restricts the nesting depth for your circuit program. Your circuit program

has a maximum nesting depth of 58 objects.

This determines the following:

1 input + 56 blocks +1 output

Max. depth of a circuit program = 58 objects

Thank you!
Tthat was very helpful in determining what the maximum nesting depth is.
"memory space" as search term / topic is a good tip.

A quick search in the LOGO! Manual (A5E33039675) brought no such answer.

Any ideas on a formal description for "Layout memory"?

Greetings.