Hi guys,

I'm using TIA Portal V13 . Has enyone any idea why I can't find the analog input module 4AI (6ES7531-7QD00-0AB0) ? All I an see are just 8AI modules.

Regards

Andrew

Hello,

where you look for the module?

ic can find it in V13 under S7-1500 and ET200MP.
Can you make a screenshot of you hwcatalog, and check that you have no filters set which hidden this module.
Which TIA you use exactly ?(Step7, WinCC, Professional or Basic)

Regards
Christoph

Hi Cristoph

I'm using TIA Portal v13 Professional.Please find attached.

Regards

Andrew

Hi,

sorry my mistake. i have forget that i have install the latest HSP on my V13 System.

The AI4 is integrated in the HSP for TIA V13 which you can download here.

Regards and good luck
Christoph

Hi Cristoph,

Thanks! I'm downloading the HSP as we speak .Just a thought though , if I'm downloading the last update found by TIA Updater would it have the same effect ?

Regards

Andrew 

AndrewCa

I'm downloading the HSP as we speak .Just a thought though , if I'm downloading the last update found by TIA Updater would it have the same effect ?

 No 

Point taken.

Regards

Andrew