4/20/2015 4:13 PM | |
Posts: 15 Rating:
|
Dears, I'm currently building a PLC Step7 program and I'm using Simatic ModbusTCP, and I'm following the instructions in the attached file (came with ModbusTCP CD) and for some reason after installing the ModbusTCP on my PG I couldn't find "AG_RECV" V4.8 (page 26) which is required for error free operation instead I found V4.7 I'm using the following sw:
So I was wondering if you can you help me to obtain version 4.8 of FC "AG_RECV", or guide me to what to do to obtain this FC. Thanks a lot and best regards, mMoussa AttachmentSIMATIC ModbusTCP for NCM_CP English.pdf (199 Downloads) |
4/21/2015 5:50 PM | |
Posts: 3093 Rating:
|
Hello mMoussa, Regards, |
This contribution was helpful to
1 thankful Users |
4/23/2015 12:34 PM | |
Posts: 15 Rating:
|
Dear Kaulquappe, Thank you very much for your help. Best regards, mMoussa |
Follow us on