Hi,

 When using SIMATIC Logon with WinCC Flexible there is a very basic log on dialog with just username and password entry fields and OK and Cancel buttons. Using SIMATIC Logon with PCS7 you can select from the available domains and there is an additional Change Password button.

I know the domain is configured in the application for WinCC Flex so there is no need to select a domain from the dialog but is there any way for domain users to change their password through SIMATIC Logon with WinCC Flex?

This is particularly relevant if there is password aging configured on the domain, the user will be locked out of WinCC Flex if the password expires...

Regards,

Tim Keane

Hello theferiority.

Each user can change his own password in simatic logon. Please refer to the manual you can find here:

https://support.industry.siemens.com/cs/ww/en/view/34519648

Regards, JRB28

Hi JRB28,

Thanks for the reply. The description of changing your password in the manual is from the "Change Password" button but this is not available in the WinCC Flex logon:

https://cache.industry.siemens.com/dl/files/493/19537493/img_76707/v1/wincc_flexible_anmeldung_tp170_t1_01_e.gif

Regards,

Tim Keane