Switches of type XB000

ARE SUPPORTED in TIAP,

and I used it many times.

And now switch to network view and the entry's are gone 

the objects in the topology have no functionality! 

if you connect another port of the unmanaged switch like the projected, then nothing happens,

no error and no topology fault.

This entrys can only be used for documentation if you realy need this, not more!

It still DOES NOT CHANGE THE FACT that XB200 ARE NOT in HW catalog.

And XB200 is managed switch.

And stop trying to make TAI portal bug-free program. It is FAR AWAY from it.

Homeroid_BL

It still DOES NOT CHANGE THE FACT that XB200 ARE NOT in HW catalog.

And XB200 is managed switch.

And stop trying to make TAI portal bug-free program. It is FAR AWAY from it.

download the latest HSP from here:

https://support.industry.siemens.com/cs/ww/en/view/72341852

and then the modules you need are in the catalog

And i never say that TIA is a bug free programm!

But a not listed HW is not a bug or have you any document in which is defined that  this device must be in HW Catalog?

Strange coincidence that HSP for XB200 is released 2 days after I mention it here in forum.

At least, SOMEONE reads this, good to know.

:)