Hi There,

I am working on an application which has got S7-314 2PN/DP+ 12 SinamicG 120C + 2other drives + 2 KTP900.

I already program some parts in Step7 5.5 and then because HMI has changed and I have to use WinCC comfort( as it is part of TIA Portal V13). I can continue on Step7 5.5 and WinCC comfort separately but it need some manual tagging and . . .

I want to know can I do everything on TIA Portal V13?

if yes, how can I migrate my existing program to it?

thank you

Mahyamr

Hi There,

I am working on an application which has got S7-314 2PN/DP+ 12 SinamicG 120C + 2other drives + 2 KTP900.

I already program some parts in Step7 5.5 and then because HMI has changed and I have to use WinCC comfort( as it is part of TIA Portal V13). I can continue on Step7 5.5 and WinCC comfort separately but it need some manual tagging and . . .

I want to know can I do everything on TIA Portal V13?

if yes, how can I migrate my existing program to it?

thank you

Please consider the alternative before porting everything from Step7 V5.5 to TIA.
The alternative is creating a proxy of the PLC. [LINK]
You will have a "dummy" that will stand in for the PLC inside TIA.

Please ask if you have question - I am sure others can help more.

Hello,

at the moment it looks that you can do all in TIA.

The 2 other drives are configured with GSD/GSDML File?

To migrate the classic project to TIA you need the SW Packages:

TIA Step7 Professional V13 (Latest is V13.0 SP1 UPD4)

TIA WinCC Comfort V13 (Latests is V13.0 SP1 UPD4)

TIA Startdrive V13 (Latest is V13.0 SP1 UPD1)

To Migrate the project do the following steps:

If all SW ist installed on the same System (Step7 V5.x /STARTER + TIA)
Start TIA Portal
click on Migrate Project
browse to the project Folder of the classic project and select the s7p file
check the box "include HW Configuration)
Select a destination path for the TIA Project
start Migration

If SW ist installed on different System:
install the TIA MIgration Tool on the System which have Step7 V5 installed
start the migration toll, select the project, activate the Checkbox "include HW Configuration" and create the MigrationInput file
Copy the migration file to the TIA System
Start TIA
select Project migrate -> select the Migartion File > start the migration

Regards

Christoph

thank you for your complete answers

yes both other drives have GSD files

is there any application example to help with working with drives. in Step 7 5.5 I used an example from this forum to communicate with my drives through PN.

is there anything like this for TIA Portal V13?

Hello,

which example do you mean?
The basics are the same for using drives are the same in TIA like in Step V5.
If you have already a working projekt in Step7 V5 then you can use it in TIA after the migration without any Change.

Regards

Christoph

I want to start from scratch with TIA Portal. it is my first experience with it and an example program with TIA Portal V13 and G120C or something similar could be very helpful.

.

here a lot of application examples:

https://support.industry.siemens.com/cs/ww/en/view/56749384

https://support.industry.siemens.com/cs/ww/en/view/64877108

https://support.industry.siemens.com/cs/ww/en/view/61450312

https://support.industry.siemens.com/cs/ww/en/view/60140921

Regards
Christoph