HELL EVERYONE,

i have cp342 (342-5da02) can i feth the program or connect it with pg through 6ES7972-0CB20-0XA0 MPI PROFIBUS DP CABLE,

MY CPU NO IS 361-3CA01-0AA0 

is there any other possibility to connect my cpu to pg 

Regards and thanks

Hell Back

please tell us which PLC you use.
You have named the CP and the IM361, but no PLC!

Regards
Christoph

Hello,

no that is no PLC, that is a Interfacemodule for central peripherie.
So it look at the moment that you have no PLC and also you can't use the CP and the IM !

Can you make a picture from you HW?
From the IM361 is a cable wiring to another IM and here is plugged the PLC?

Regards

Christoph

now i have the full information sorry for above post

i have HMI cpu integrated in it 633-1df02-0ae3 ,

3 of the analog inputs are attached to the 361-3CA01-0AA0 and analog input module is 7kf02

the cable thorugh which HMI (CPU INTEGRATED) communicating is 368-3cb01-0aa0 ,

now the problem is that whenever i attach my cable to above CPU mentioned , it stops working  and sf fauly appears in CPU ,

Apart from that cpu is working properly 

nomanarif_26

i have HMI cpu integrated in it 633-1df02-0ae3 ,

now the problem is that whenever i attach my cable to above CPU mentioned , it stops working  and sf fauly appears in CPU 

 Hello,

This is a C7-633 CPU is 315, if you can have you tried to connect via MPI?

Product Details - Industry Mall - Siemens Great Britain

C7-633, C7-´634 - Siemens