Hello,

just found old LOGO! 230RC like this on photo so I'm searching for latest version of LOGO! Soft Comfort that supports that old  LOGO! 230RC.

Please help. Thanks

You must have an LOGO Softversion thats equal og newer than yourvLOGO version.

I cant see it on the photo, but think you have an LOG 0BA5.

So you can use LOGISoft version 5 to the latest version Version 8.

In LOGO Soft you must always make the settings fir the right LOGO,

It can by CTRL + H oder by the little box in the lower right corner of LOGO Soft

Just installed Soft Comfort v8, and it looks like it doesn't support my old LOGO, right?

What is latest version that support?

You would select a logo in the network mode. But the 0BA5 is not network-compatible.
You must create a new diagram in the diagram mode and then select under File Properties > Hardware the right logo.

Look at the Video in attachment.

Sorry, i forgot to told you:

a: Use the keycombination CTRL + H  and select the right LOGO version, or

b: Click on the little LOGO symbol in the lower right side of the screen and select the right LOGO version, or

c; go to TOOLS (tab on the top f your screen) en then go to Select Hardware and the select the right LOGO!

Its only possible tho make the right choise if:

Your start with no programm on the screen, or

If you have make a programm that fits in the LOGO you wishes

Thanks for help!

[snip]

----------------------------------------------------------------------------------------------------
New question is split to a separate thread with the subject How can I see when connection to my LOGO is established?

Best regards
Min_Moderator