Hi,

My configuration is as follows: 

[PG/PC]-----------ethernet------------[S7300 CPU + CP343-1]------------Profibus-----------[SIMOREG DC MASTER]

Under windows XP i can configure routing via S7-300 to SIMOREG (NetPro), but under Windows 7 it doesn't work. Immediately after try to connect from DriveMonitor i get message "Drive is not accessible via configured network interface.." (or something like that)  Immediately means there is no delay to reach device via network just this message. The same software is installed under windows XP and windows 7. I also try on other PG/laptop with Windows 7 but still the same. Can somebody help?

Thanks.

Hello.

Do you have DriveES Basic installed on your PC?

Have you inserted PG/PC station in Netpro and assign routing entry point?

KSN

Hello.

Do you have DriveES Basic installed on your PC?

Have you inserted PG/PC station in Netpro and assign routing entry point?

 Thanks for reply. Yes, i have DriveES Basic installed, and PG/PC station inserted and assigned. I used routing many times on computers running windows xp :/