Navigation
Rating 
Thanks 0
6 Entries
| 9/8/2015 12:57 PM | |
|
Posts: 49 Rating:
|
Is there any way to display a "Date/Time" of the Last Event on the Display ? E.g. Counter : 20 |
| 9/8/2015 1:50 PM | |
Joined: 12/18/2014 Last visit: 9/1/2025 Posts: 35909 Rating:
|
A time stamp as a SCADA or PLC does not exist in the logo. But if you create a text message, you can display there then when the message text has been activated. AttachmentLOGO! 8 Soft Handbuch 0BA8 06_2014_english.pdf (229 Downloads) |
| 9/8/2015 2:19 PM | |
|
Joined: 12/18/2014 Last visit: 9/1/2025 Posts: 35909 Rating:
|
I do not think that the user thinks the diagnosis. It serves actually for troubleshooting. |
| 9/8/2015 2:27 PM | |
|
Joined: 12/18/2014 Last visit: 9/1/2025 Posts: 35909 Rating:
|
Here's an example of what I mean.
AttachmentSchaltplan1.zip (227 Downloads) |
| 9/8/2015 2:32 PM | |
Joined: 8/5/2015 Last visit: 9/20/2021 Posts: 120 Rating:
|
understand you, ofcause if he what see time of any operation he must write it to logo, |
Follow us on