How do you make an IF_CASE statement in STL?

I need to compare an input with a number and if the input is bigger than the said number then it must be reseted.

IF MW100 > 99

MW 100 := 0

MW 110 := 1

ELSE 

 Hello,

CezarB

How do you make an IF_CASE statement in STL?

I need to compare an input with a number and if the input is bigger than the said number then it must be reseted.

IF MW100 > 99

MW 100 := 0

MW 110 := 1

ELSE 

 If you need a case in STL like what you have in SCL, check THIS thread.If you want to implement a simple IF THEN structure use the following structure.

L MW100

L 99

> I

JCN RES

//  main task

L 0

T MW100

L 1

T MW110

JU END

RES: NOP 0

// your else condition

END:NOP 0

I hope this helps,

hdhosseini

Thanks a lot 

Augmented code below.

CezarB

 A     "Clock"

      FP    "Clock" <- here you MUST use other bit variable than in the preceding line !

JCN END

      L     "STLSum"

      L     1

      +D

      T     "STLSum"

      L     "STLSum"

      L     99

      >D

JCN END

      L     0

      T     "STLSum"

      L     "STLCount"

      L     1

      +D

      T     "STLCount"

END: NOP 0