Dear Experts,

                I have installed TIA v13.00 And PLCSimulator  V13.00 Both The Software .

                S7-1500 Plc i have simulated sucessfuly . But I want to Simulate S71200 plc and S7-300 Plc in Tia Portal v13.00 Software  ..

               Is There Is any solution . Please Help this support.

Thanks & regards,

Arasan..

S7-1200 Simulation only since FW4.x

S7-300 Simulation with PLCSIM V5.5 but NOT with PLCSIMV13 (TIA) . 

The TIA Portal software is now at V13 SP1 Update 5.

You will need at least service pack 1 to be able to simulate S7-1200 PLCs. You will need to upgrade incrementally (files available on Siemens website).. first SP1 (update 0), then to the right update.

It is important that ALL components of TIA Portal is upgraded before moving to a next update.

PLCSim is now at SP1 Update 1.

See also..
https://support.industry.siemens.com/tf/ar/en/posts/131319/

Dear IBN and William,

                          I want to simulate S7-1200 OR S7-300 PLC means and  Below Firmware V4.X Means What shall we do ..

                          If Only Solution is  Update the Software V13 Sp1 means , i want to do Update 0 to Update 5 At one by one .???... 

                    Please Tell me clearly.

Thanks & Regards,

Arasan..

Arasan

Dear IBN and William,

                          I want to simulate S7-1200 OR S7-300 PLC means and  Below Firmware V4.X Means What shall we do ..

                          If Only Solution is  Update the Software V13 Sp1 means , i want to do Update 0 to Update 5 At one by one .???... 

                          

                    Please Tell me clearly.

Thanks & Regards,

Arasan..

Simulating the S7-1200 firmware V4.0 and above is the only option - if you have TIA Portal V13 SP1.

If you have an existing program written for version lower than V4.0 then you will have to make a new version with a different PLC to make the simulation. The working between FW3.0 and FW4.0 should not matter too much for your simulation.

You do not have to upgrade SP0 to the latest update number.
If you follow the link I have supplied - you will see what steps to take.

!!! make sure you have the license stored somewhere before doing the upgrade process.

Any more doubts?
w

Dear William ,

                   Thank you for your update!

                   I ill follow the steps to update in Sp1..

                                            Thank you very much for ur Great Support.

Best regards,

Arasan..