Hello everybody

First time with TIA portal

I try to migrate old s7-300 programe to TIA but every time error message appears says error in HW configuration migration

I attached old HW configuration and the error log

B.R

Hello,

this PLC Type is to old and not supported in TIA Portal so the migration fails.

You can't migrate this project with this old PLC to TIA Portal.

Regards
Christoph

If you start migration, just deselect migration of Hardware first.

Later, you may choose a hardware configuration that will work with TIA.

If you do not like to change your harwdare, don't use TIA.

Hello,

Kindly have a look at the following topics: