Hello

Here is my error when I want to convert my program Step7 TIA Potal

​In STEP 7 , I " compile all " and I always error

​

Open the original Step7 V5.5 project in Step7 V5.5.
Have the software check for consistency and recompile the whole project.

The project must be compiled in STEP 7 V5 before you start the migration.

In SIMATIC Manager klick with the right mouse button on the Blocks folder and select Check Block Consistency. There select Program and Compile all. 

Jeff Casagrande

In Step 7, try Save As and check With Reorganization (slow).  This worked for me when I had something similar.  You will need a new filename.

I did also
but still the same the problem

jeanmy

 

Jeff Casagrande

In Step 7, try Save As and check With Reorganization (slow).  This worked for me when I had something similar.  You will need a new filename.

 

I did also
but still the same the problem

Open and save DB10 and all UDT that are included.