Hello

I am new in  LOGO. I have a problem, i cannt find logo in TIA portal. 

Or

Is possible to make vizualization for logo on HMI basic panel?

I have TIA portal advance v13.

For programming LOGO you need the LOGO! Software Comfort (LSC). The newest version is V8.

http://w3.siemens.com/mcms/programmable-logic-controller/en/logic-module-logo/demo-software/Pages/Default.aspx

Kraftstrom

Is possible to make vizualization for logo on HMI basic panel?

I have TIA portal advance v13.

 Yes, that is possible. Then you need at least WinCC V11 or higher.

http://w3.siemens.com/mcms/programmable-logic-controller/en/logic-module-logo/application-examples/Pages/Default.aspx

On this Siemens website there is an example of communication between a logo and HMI.

Hello,

Yes, is possible make visualization on Basic Panel with LOGO.

Palo

https://www.youtube.com/watch?v=S8lXPR9AXE4

New question published by AutoGen_1620986 is split to a separate thread with the subject Manual for easy lerning TiA V13.

Best regards
Min_Moderator