Hi, My question has been asked several times, but remains without an answer.

PG M4 'TIA Updater' is reporting 'Unable to connect to the server'.

Has/does the server address change? How can I fix this to receive any relevant updates?

Matt

Hello,

have you check the steps in this FAQ:

https://support.industry.siemens.com/cs/ww/en/view/109474528

Do you use a proxy for the Internet connection?

Regards

Christoph

Hello, 

If internet is working in your PG then upadater should work.

Have done the checkmark automatic upadate check box.

My suggestion would be, dont use updater , its too slow. Better register for news letter. So whenever there is any upadte or new leeased then you will get mail. Also weekly every sunday you will ger apllication news letter.

 There you will find  , latest realse products list, links, FAQ, certificates, application note, firmwares, HSP, manuals etc.

If you feel this post is useful then dontforget to rate

Hi, Yes. I do use a proxy for internet connection, I will ask if anything has changed to cause this issue.

Internet works fine but Updater doesn't.

Thank you.

Hi,

I had the same problem. The solution in my company was to go under Windows domain.

Try this,

regards.