Dear All,

I have tried to copy a program from memory card to LOGO plc. As mentioned in Website, I have inserted memory card and switch ON the PLC. and press Start Option in Program. When Program is loaded, I have switched OFF the PLC and removed the memory Card. But Still, PLC showing NO Program Indication. 

So I tried to transfer file from Memory Card to PLC, but still have same problem, showing indication NO Program in PLC.

Any other method to transfer file from Memory card to PLC. 

During checking Card Option in LOGO PLC, Card Copy Protected Option is "YES".  Is this making the problem.  How to make Copy protection "NO". 

Kindly forward the solution.

Thanking in Advance

Hi,

Can i know what version of LOGO device you are using?

Can i know the file name (name of the program file that you had copied into your memory card) that you are using. And also the extension of the program file?

Below is how the file name of the program should be when the program is being transferred from memory card to LOGO!.

Make sure it has exactly the same name as shown below with the extension (.bin)

LOGO_U_P