I have PLC programmed s7-1200 and it is connected to real HMi Weintek and it works

PLC - 196.168.10.30

HMI - 196.168.10.31

I want to connect PLCsim to real HMI. I set NETTOPLCSIM as manual said and no errors, but HMI doesn't show dynamic objects - (no connection)

I attached my settings

Any clue what is wrong would be useful

pszczepan

I have PLC programmed s7-1200 and it is connected to real HMi Weintek and it works

PLC - 196.168.10.30

HMI - 196.168.10.31

I want to connect PLCsim to real HMI. I set NETTOPLCSIM as manual said and no errors, but HMI doesn't show dynamic objects - (no connection)

I attached my settings

Any clue what is wrong would be useful

 Hello pszczepan

Try this

NetToPlcSim: how to connect Step 7 PLC-Sim to Scadas

Connection probleme with Real Comfort Panle and PLCSIM V13 (S71200)

SANDEEP Bakoliya

Finally it works - I write clue:

you have to set IP of your PC the same what is the IP address of simulated PLC in PLCSIM.

Rest parameters set as it is in Nettoplcsim manual

If you set everything correct you can have access to your virtual PLC even from virtual HMI - Weintek (on-line simulator)

thanks for help