Hi,

I had converted a S5 Program into S7 but I found out that there was a BCD conversion error in S7.

Here is the STL in S5:

L 16#02EE

SD #TIM

JU M002.

 In STEP5, there was no errors showing but in STEP7 does.

I do understand that maximum value of a BCD is 999.

So, is that any other meanings on that 16#02EE?

86988

 

001B      :L   DW   6

001C      :SD  =TIM

001D      :JU  =M002

 

Do you means this coding?

I needed a look at the piece of code where a value is being transferred to DW6.  However please find attached some screenshots from S5 and S7 manuals regarding Timer instructions. I hope they will be helpful.

meeda

 

86988

 

001B      :L   DW   6

001C      :SD  =TIM

001D      :JU  =M002

 

Do you means this coding?

I needed a look at the piece of code where a value is being transferred to DW6.  However please find attached some screenshots from S5 and S7 manuals regarding Timer instructions. I hope they will be helpful.

 There are not being transferred. Its a constant value from mystery place.