Thanks,

Jack.

Hello,

You may find this thread useful.

Regards.

If it helps, you may use rate button.

meeda

Hello,

You may find this thread useful.

Regards.

If it helps, you may use rate button.

 Thanks a lot for your support.I do the first time S5 procedures, we hope that a lot of support!

1    This program is a tool to convert the program.I compared S5 and S7 programsFor S7, the removal of lir0, the results of the program did not affect it? 

FB054 conversion

//;

A(;

L   0;

L   MB 222;

<>I;

);

A(;

L   1;

<>I;

);

A(;

L   2;

L   MB 222;

<>I;

);

A(;

L   3;

<>I;

);

A(;

L   4;

L   MB 222;

<>I;

);

A(;

L   5;

<>I;

);

A(;

L   6;

L   MB 222;

<>I;

);

JC  M001;

//;

A   M 232.0;

R   M 232.0;

L   W#16#E400;

//;

L   MB 223;

SLW 1;

+I;

//      LIR 0;

// *** Error in Line    5997  (FB  54):  Command not defined. ***

//;

T   MW 252;

L   0;

==I;

S   M 207.3;

BEC;

=   M 232.0;

L   MW 252;

+    -2;

//      LIR 0;

// *** Error in Line    6008  (FB  54):  Command not defined. ***

+    -6;

T   MW 230;

//;

L   MB 224;

<I;

S   M 207.4;

BEC;

//;

L   MB 222;

L   4;

<>I;

JC  M002;

L   MB 224;

+    1;

L   MW 230;

>I;

S   M 207.4;

BEC;

2、The same problem, SFC20 results are not correct, need to reprogram, yes? How to achieve?

FB150 conversion 

NETWORK5

L     DBW    8

INC   1

SRW  1

L     8

+I

T     DBW  286

L     DBW    6

L     DBW   12

//CALL SFC  20 (

//   SRCBLK       := P#????? BYTE 0 ,

//    RET_VAL     := conv_ret_val,

//    DSTBLK      := P#????? BYTE 0

//       );

// *** OK in line 14298 (FB 150): Generates CALL SFC20. Please fill in the parameter list. ***

L     W#16#80

JU    M023

M022: L     8

T     DBW  286

L     DBW   10

L     DBW    6

//CALL SFC  20 (

//   SRCBLK       := P#????? BYTE 0 ,

//    RET_VAL     := conv_ret_val,

//    DSTBLK      := P#????? BYTE 0

//       );

// *** OK in line 14312 (FB 150): Generates CALL SFC20. Please fill in the parameter list. ***

L     W#16#80

JU    M023

M018: L     W#16#81

JU    M023

M019: L     W#16#82

JU    M023

M020: L     W#16#83

1. For understanding LIR and TIR commands and their conversion, you may find this and this thread useful.
2. For understanding SFC20 inS5 to S7 conversion, you may find this and this thread helpful.

If it helps, you may use rate button.