edit: Problem Solved!  The FAQ that was pointed out, had the necessary info, thank you Very Much. Had to just update the soft comfort and so :)

First in Logo Softcomfort I tried 'save-as' -> binary  and save to SD-Card(fat 32, 16GB) with the default filename for binary.

insert card in to logo, ask it to save program to logo and it resets it self but program did not transfer.

next I tried with ethernet cable. Setup logo ip:192.168.0.3, mask:255.255.255.0, gateway:192.168.0.1

and on PC I set ip:192.168.0.5, mask 255.255.255.0, gateway: 192.168.0.1

Soft comfort shows that connection is ok and logo is found. Click to transfer the program and it just soon closes the transfer window. No error messages. And program did not appear into Logo..

Logo is brand new 12/24RCE -model

New question published by surefire is split to a separate thread with the subject Having trouble loading a program from a SD card to the LOGO.

Best regards
Jen_Moderator