Dear all,

I have a problem using SX1276 upm library. By default the constructor of the class set some input with the interrupt but if I have understand well, not on all input of IOT2020 can be set the interrupt mode.

Where I can find some information about this problem?

Thanks,

Massimiliano

Dear Philipp,

the SPI communication between SX1276 and IOT2020 is OK. Now I have two problem:

the first one is that there are some radio settings difference between my c++ IOT2020 project and dragino gateway and I not receive the sending data in dragino console.

The second point is a hardware question of SX1276 send and receive interrupt. My chip model not use this two digital output but the upm sx1276 class use it. This is not a very big problem because is possible to modify it or buy a different chip revision with hardware output.

So, my test is not full complete.

Do you have some news about LoRa and IOT2020?

Massimiliano