hello dear experts,

how can i retrieve program from memory card to my laptop?

memory card is 6es7 952-0kh00-0aa0

best regards.

Hey!

Maybe this can be of any help? :

https://support.industry.siemens.com/cs/document/12068554/how-can-you-load-projects-to-a-memory-card-and-back-again-to-a-pg-pc-?dti=0&lc=en-WW

TL,DC; If you want to retrieve a project form the memory card, it can be done by going to the tab PLC and then to "Retrieve from Memory Card".

Hope this helps in a way c:

thanks a lot for your reply.

i select plc----" retrieve from memory card" in simatic manager software but nothing is displayed 

in the screen to select.

thanks.

saeedplc

thanks a lot for your reply.

i select plc----" retrieve from memory card" in simatic manager software but nothing is displayed 

in the screen to select.

thanks.

 Hello saeed,

perhaps:

PLC/Retrieve from memory card...

Via "PLC/Retrieve from memory card..." you can read out individual files stored via "PLC/Store on memory card..." from the memory card and save them on your PG/PC. If files are not displayed, you must change the "file type" in the open "Fetch files from PLC" window.

Ste39

 

saeedplc

thanks a lot for your reply.

i select plc----" retrieve from memory card" in simatic manager software but nothing is displayed 

in the screen to select.

thanks.

 Hello saeed,

perhaps:

PLC/Retrieve from memory card...

Via "PLC/Retrieve from memory card..." you can read out individual files stored via "PLC/Store on memory card..." from the memory card and save them on your PG/PC. If files are not displayed, you must change the "file type" in the open "Fetch files from PLC" window.

 thank you very much for your reply.

i changed the file type but nothing is displayed!!!!

how can i know that if there is file in the memory card?

please help me.

saeedplc

 

Ste39

 

saeedplc

thanks a lot for your reply.

i select plc----" retrieve from memory card" in simatic manager software but nothing is displayed 

in the screen to select.

thanks.

 Hello saeed,

perhaps:

PLC/Retrieve from memory card...

Via "PLC/Retrieve from memory card..." you can read out individual files stored via "PLC/Store on memory card..." from the memory card and save them on your PG/PC. If files are not displayed, you must change the "file type" in the open "Fetch files from PLC" window.

 thank you very much for your reply.

i changed the file type but nothing is displayed!!!!

how can i know that if there is file in the memory card?

please help me.

 Hello,

 are you sure that your Memory card is not empty?

no, i am not sure.

how can i know if there is any file in the memory card?

saeedplc

no, i am not sure.

how can i know if there is any file in the memory card?

 Hello,

you can go online in CPU module information and then Memory