Dear All ,

             How to select Terminal module on ET200SP module.

i having following module .can you tell selected correct or not ?Selection i have little confusion. 

any easy way available. i selected through ST70 catalogs.

Module:-                           Terminal Module:-

6ES7131-6BH00-0BA0---6ES7193-6BP20-0DA0

6ES7132-6BH00-0BA0---6ES7193-6BP20-0DA0

6ES7134-6GD00-0BA1---6ES7193-6BP00-0BA0

6ES7135-6HD00-0BA1---6ES7193-6BP00-0BA0

Thank in advance.

hi S5 SHOOTER,

have a look in the ET200SP manual. You will find a chapter for selecting a suitable BaseUnit

Basic Information -> ET200SP Distributed I/O System, Chapter 3.1

hope this helps,

regards,

Hello S5 SHOOTER,

maybe it's easier to configure your ET200SP station with the TIA Selection Tool.

There you can select "only the right" terminal modules for any module.

After the configuration you have a part list with the right parts and you can export this directly to the Siemens Mall or a excel list and more.

Hope this is helpful.

regards
CaOd