Dear all,

How can I move the object like shown in the attached picture in Circular movement and the object and the center of the circle highlighted also in the attached picture, Please help many thanks in advance.

Best Regards,
Mahmoud Hazem

Dear all,

Any update Please.

Best Regards,
Mahmoud Hazem

Hello Mahmoud.Hazen.

What I can suggest you is to use a symbolic I/O field, create all the graphics in all degrees position you need and then select them in he field with your variable. Just take out the scroll bar from the I/O field.

Enhanced objects have a rotate property but I'm not sure if you can manipulate it automatically, also, manually only allows to select 0°. 90°,180° and 270°.

I hope this helps.

Regards.

Dear Rescobedo,

As you can see in the attached picture to over come this issue I made 5 screen items and I intend to make them visible and hide regarding the change of value (1 to 0) of 5 different Boolean inputs as also shown in that attached picture, but the problem here that some times 2 of these input came at the same value in the same position (Boom up slow down and Boom up stop = 0 at same position) and I need to give high priority to (Boom up stop) to show only the object linked to this input.

Best Regards,
Mahmoud Hazem

Mahmoud.Hazem

Dear Rescobedo,

As you can see in the attached picture to over come this issue I made 5 screen items and I intend to make them visible and hide regarding the change of value (1 to 0) of 5 different Boolean inputs as also shown in that attached picture, but the problem here that some times 2 of these input came at the same value in the same position (Boom up slow down and Boom up stop = 0 at same position) and I need to give high priority to (Boom up stop) to show only the object linked to this input.

Best Regards,
Mahmoud Hazem

 Hello Mahmoud.Hazem.

If you took that approach, I'd suggest you to write on your PLC some code to determine the priority you have on the objects you want to show and use some M bits or DB bits to control the visibility of the images.

I think this would be the easier way, write some code on PLC.

Regards.

Dear Rescobedo,

Actually the problem is I am dealing with GE PLC Not Siemens, So I am to fully aware with this PLC, That's why I prefer to do it through Wincc flexible that's all, Many thanks for your support Rescobedo.

Best Regards,
Mahmoud Hazem

Mahmoud.Hazem

Dear Rescobedo,

Actually the problem is I am dealing with GE PLC Not Siemens, So I am to fully aware with this PLC, That's why I prefer to do it through Wincc flexible that's all, Many thanks for your support Rescobedo.

Best Regards,
Mahmoud Hazem

 Hello Mahmoud.Hazem

Well, if that is the case, I guess you can create some internal tags then an script to evaluate your input status. Just call the script with a value change on your inputs.

Evaluate the inputs with IF statements and assign values to your internal tags and with this, control the visibility of your graphics.

I hope this help you.

Regards.

Dear Rescobedo,

Many Thanks for your support.

Best Regards,
Mahmoud Hazem