Hi everyone here,

I am new to Siemens and I am looking for teaching board or module that consists of plc  and hmi to learn in.

Thanks

Hi,

try this:  TIA Portal Modules | from V13 | Visualization

Hello khoga;

The link offered by our friend MicTsc provides very good tutorials for learning to program the S7-1200.

But I understand that you are looking for what Siemens calls Starter Kits, containing a S7-1200 (or S7-1500) CPU, a small HMI panel, a programming cable and software. If my understanding is correct, please see these links:

S7-1200 starter kits :

https://w3.siemens.com/mcms/programmable-logic-controller/en/basic-controller/s7-1200/starterkits/Pages/default.aspx?tabcardname=starter%20kit%20overview

S7-1500 starter kits:

https://w3.siemens.com/mcms/programmable-logic-controller/en/advanced-controller/s7-1500/starter-kit/pages/default.aspx

For pricing and availability, you should select the kit that you find useful for you, note the purchase order number for that kit, and contact your nearest siemens distributor.

Hope this helps,

Daniel Chartier