Hi all,

My first post here and i'm glad to meet this forum.

My problem is that i want to engage 2 outputs goes to a motor LEFT or RIGHT.

I need to check 2 inputs I1 I2 and if the time (from weekly timer) is greater then or lower then a given time, take the appropriate action.

Example

I1 = OFF, I2 = ON Time >= 6pm  Go motor to RIGHT.

I1=OFF, I2=ON, Time <= 6pm Go to LEFT

Of course there are more combinations but i would happy to give me an example for the above situation.

Thanking in advance

Thank you for reply.

I1 and I2 are contacts from terminal switches. The switch has 2 contacts 1 NO and 1 NC.

The motor can stop by power fault at both I1=ON and I2=ON as well as their combinations.

My problem is that i didn't find any Greater Than or Lower Than function for my LOGO! 8 FS4

Is it any GTE or LTE functions , i would be glad to find them.

GTE = Greater Than or Equal

LTE = Lower Than or Equal

I didn't manage to find any of those functions in logocomfort 8.2 version i have.

ixo65

For better understanding:

As a user, you have no way to access the date and time directly within a LOGO! program.
You can only perform a kind of comparison using the weekly timer.

 This is exactly what i want to do. A simple comparison between the first digit of the current time and the time i wanted to check for.

In fact, i did that project with arduino code and now i want to do it with LOGO!

I get the current time digits from a real time clock in a format HH:MM:SS and put only the time in a variable. Then i do comparison with my wanted time and according to results i give LEFT or RIGHT motion with a motor. If it possible i would like to do the same with LOGO!