HI Goog morning

I have a problem with configuration the Technology Objects , I am configuration Analog output, but the motion control no working right.

I need your help , When I try move the motion control the analog output send value 10 VDC and the motor is  moved  to speed 100% , y this condition do one colision machine.

Also when move the TO with MC-JOG the motor is moved to speed 100%

Somebody has example to configuration TO analog output??

------------------------------------------------------------------------------------------
Split from S7-1200 PLC.

Hello JulioHdz,

please be so Kind and don't post twice for the same problem.

Hello IXO65

I have a problem with my internet and I thought that my question had not been published.

What kind of PLC do you have? Which firmware?

Procedures on how to setup TOs can be found in manuals/FAQs. But it's hard to recommend you one not knowing which PLC is it.

My PLC is

1.- Simatic S7-1200 , CPU 1214C, CPU Compact ,AC/DC/Rele   6ES72141BG400XB0

2.- SIMATIC S7-1200, AnalogOutput, SM 1232, 2 AO, +/-10V, 14 Bit Auflösung, oder 0-20mA/4-20mA, 13 Bit Auflösung     6ES72324HB320XB0

________________________________________________________________________

The Reference Speed is the max RPM drive  1750 .