Hi,

I'm inheriting this block diagram

Task - I intent to rotate my motor 90 degree continuously for 10000 times

Basically I'm using logo to test a bin flap to open and close continuously for 10,000 times

I'm looking to modify the attached block diagram such that it continuously repeats the steps... at the moment it opens the flap(pushes it down by motor rotation to 90 degree)

Thanks for the help!

Maybe someone can help to modify the program, but not a picture. First upload the program as zip file and try to describe your problem in more details or add some more comments in the program for better understanding.

Regards, Scorp

It looks as if you are using 2 inputs for starting the in / out sequence. 

You could change the inputs for timers who will continuously pulse and start the sequence. 

Enable the timer with a "always High" and it will run forever 

 Thanks Luna

Luna08

It looks as if you are using 2 inputs for starting the in / out sequence. 

You could change the inputs for timers who will continuously pulse and start the sequence. 

Enable the timer with a "always High" and it will run forever 

So what type of timer should i use?

Please find the update file attached for reference.

So I removed I1 and added High but not sure which timer should I use so that I pulses 0 and 1

Hi,

I have modified your program and added B007 and B8.

Check if this is what you need.

A button to start the process and to stop the process at 10.000 time should be added.

Hope this helps

Thanks AutoGen

This works perfectly as i asked in my original post.

Last glitch ... If you could help please. If the flap doesn't close or then how do I stop the program.

:)

(If you can)

Sorry I'm getting you to do my development work... but i'm learning as well.

AutoGen_380038

Hi,

I have modified your program and added B007 and B8.

Check if this is what you need.

A button to start the process and to stop the process at 10.000 time should be added.

Hope this helps