Dear SICAM Expert,

I have new personal goal this 2017..

my goal is to integrate energy meter (brand EMH > germany brand) to my existing SICAM PAS server.

and after I browse Siemens catalogue, they have SICAM DC which could collect data from DLMS device.

QUESTION :

1. is it possible to connect my energy meter (DLMS) to SICAM PAS using SICAM DC?
2. if yes, besides SICAM DC device, what are additional configuration tool/software/library that i should purchase? and is there any additional license related to SICAM PAS?

--additional information---

1. I attached the detail communication drawing. my existing network. I add my proposed DLMS and SICAM DC network.
   
2. the energy meter use DLMS protocol with TCP/IP connection.
3. the SICAM PAS product that I have is 6MD9000-1AA20-6AA0

Thanks

Mike J

hi

what is "Sicam DC"?

 Hi Mike J,

I also dont know about Sicam DC, but this link (product description) :

http://w3.siemens.com/smartgrid/global/en/products-systems-solutions/distribution-grid-applications/distribution-automation-products/pages/sicam-dc.aspx

Inform us that this device could communicate with energy meter (via DLMS)

But I'm not really sure.. because my goal is to read the value on energymeter so that this value could show in Sicam Pas. I hope I can get more information about this.

Thanks Mike J

Thanks Mike J,

thanks God I hasnt order it yet..

I'm still looking for siemens product to make my Sicam Pas read the value of energy meter. of course in simple scheme, and budget. before I decide to use OPC (last option)

BR

ifit prabowo

Mike J

Hi

check if the meters have other protocols. Sicam PAS can read only current values from them, not historical values, which is the case of Sicam DC (I guess)

 Thanks Mike J,

I already have confirmation from supplier that energy meter only support DLMS (IEC62056-21),

I think I should try OPC

I think it is not possible. The SM2551 supports only IEC1107 protocol for energy meters.

Try to find DLMS Gateway. For example DLMS-MODBUS TCP/RTU GATEWAY

AutoGen_682172

is it possible to get data from DLMS Energy meter by using TM1703 ACP  with SM2551 serial port 

 hi

i think you can read the data from the energy meter if supports modbus RTU SLAVE  and the SM 2551 will be modbus RTU master.

SM2551 is a serial circuit which can be used for serial data .