Hi,

I am new to using the Siemens logo plc. So this is the first project I do with this device.

To place the program to the 0BA8 device I use a sd-card. But the plc doesn't seem to work with the program on the sd. The pc will show the program on the sd, but the plc only shows an empty program. What can I do to make the plc read the LOGO_U_P.bin program? In the info window the LOGOComfort shows: 0 Message blocks lines transferred.

Hi ixo65,

Thanks for your help. The problem was that I had selected the 0BA8standard in the hardware settings. This had to be 0BA8 FS4, so now it's solved.