Dear Sir

I want to see my sinumerik 840D NC program..because my machine is not working as my requirements and OEM is not supporting me.. please help me out how can i access and see NC Programming. i see complete plc program by using simatic manager but i can not resolve my problem.. my problem is that i want to change TOOL by using M commands configured in PLC but there is a DB input status used in that plc program to complete the logic.. the DB105.DBX20.0 .. and how this DB status input will come and from where i dont know.. please help me out to see all programming of sinumerik 840D .. see attached 

Hi,

The tool change program is generally know as “L6”. The tool change program should be located in the Manufacture Cycles area which is viewable on the HMI.

Without knowing more details about your system (840D PL or SL, HMI Advanced or Sinumerik Operate etc) I can not give the path for navigating to the correct area

Hope this helps

Luke

...sent from App

New question published by U_414012cb-763c-460a-89d4-c17a32e9bd04 is split to a separate thread with the subject Can get standard PLC program like Tool Changing with comments?.

Best regards
Jen_Moderator